問い合わせ先

Stable and reproducible measured values

The hand-held measuring probes are designed for everyday use. The robust stainless-steel housing is corrosion resistant and the basis for the special, long-life probe technology that is inside.

Our hand-held measuring probes can be used with both the SONODUR 3 mobile hardness tester and the SONODUR R developed for fully automated production.

The intelligent measuring system of each probe covers the entire hardness range of the classic Vickers scale. The hand-held probes are suitable for measurements of metals, industrial ceramics and, with certain restrictions, also for highly heterogeneous materials such as cast iron (nodular cast iron e.g. GJS500).

Our probes work according to the UCI hardness testing method (Ultrasonic Contact Impedance). During this process, the probe rod is excited to vibrate in the longitudinal direction with its natural frequency. At the lower end there is a Vickers diamond which is pressed into the material to be tested. A defined load is applied via a spring. When the Vickers diamond penetrates the specimen, this vibration is damped and a frequency shift occurs, which can be measured. When the nominal test force is reached, we calculate the hardness value from this frequency shift using the Vickers scale and display it immediately.

The biggest difference in the method compared to the classical Vickers hardness test is, among other things, that the contact surface of the Vickers diamond is responsible for the frequency shift of the vibrating rod. Whereas in classical hardness testing, the impression of the diamond must be measured optically.

Your advantages at a glance

  • High reproducibility of the measured values: high-quality measurements
  • Measurement time is only a few seconds: Allows many measurements and provides a quick decision basis for the operator
  • High flexibility: Largest range of probes with different test loads worldwide
  • Minimal test pressure: The method can be considered as low-destructive and therefore saves your resources
  • Small, handy test probes: Optimal access to the test positions to be measured
  • Cost-saving: No need to destroy the component to be measured
  • Mobile hardness testing on site
    -
    During incoming goods inspection
    - During production
    - On already installed production parts in the field
  • Easy to automate: Operator-independent measurements for even higher reproducibility of measured values
  • Standardized test method: UCI method - Our expertise for your safety

For more information on this product, please visit our NewSonic Website.

テクニカルデータ

Test method:UCI method, according to DIN 50159 1,2-2021, ASTM A1038 2019
Material probe housing:stainless steel
Dimensions probe housing:25 mm x 177 mm (may differ for special probes)
Material measuring tip:diamond
Diameter measuring tip:3.4 mm (optional 1.7 mm)
Length of measuring tip:13 mm (optional 40 mm)
Tip angle measuring tip:136°
Connection:wired via Lemo plug connection
当サイトではcookiesを使用しています。

当社は、コンテンツや広告のパーソナライズ、ソーシャルメディア機能の提供、当社ウェブサイトへのトラフィック分析のためにcookiesを使用しています。また、当社は、お客様の当社ウェブサイトの利用に関する情報を、当社のソーシャルメディア、広告、分析のパートナーと共有します。当社のパートナーは、この情報を、お客様が提供した他の情報や、お客様のサービス利用の一環として収集した他の情報と組み合わせることがあります。

当社のcookieが変更されたため、再度の同意が必要となります。

当社のcookieに対する以前の同意は失効しているため、新たな同意が必要です。

必要な cookie は、ウェブサイトを利用者にとって使いやすくするのに役立ちます。クッキーは、ウェブサイトへのログインや個々のクッキーへの同意などの基本的な情報を保存します。

名前 プロバイダ 目的 ずっと タイプ
YSC YouTube

YouTube Video

Sitzung Cookie
CONSENT YouTube

YouTube Video

2 Jahre Cookie
VISITOR_INFO1_LIVE YouTube

YouTube Video

6 Monate Cookie
__hs_opt_out HubSpot notwendig

このCookieは、オプトアウト後のユーザーが再度同意を求める必要がないようにするためにHubSpotによって使用されます。

13 ヶ月 Cookie
__hs_do_not_track HubSpot notwendig

このcookieは、ユーザーの追跡を無効にするためにHubSpotによって使用されます。

13 ヶ月 Cookie
__hs_initial_opt_in HubSpot notwendig

このcookieは、HubSpotがトラッキングへの同意を保存するために使用します。

7 日 Cookie
hs_ab_test HubSpot notwendig

このcookieは、A/Bテスト中にユーザーを常に同じグループに割り当てるためにHubSpotが使用しています。

セッション Cookie
*_key HubSpot notwendig

このcookieは、ユーザーが同じコンテンツに何度もログインしなければならないことを防ぐためにHubSpotによって使用されています。

14 日 Cookie
hs-messages-is-open HubSpot notwendig

このcookieは、チャットウィジェットの設定を保存するためにHubSpotによって使用されます。

30 分 Cookie
hs-messages-hide-welcome-message HubSpot notwendig

このcookieは、チャットのウェルカムメッセージが1日1回表示されるようにHubSpotが使用します。

1 日 Cookie
__hsmem HubSpot notwendig

このcookieは、HubSpotがユーザーのログインプロセスを保存するために使用します。

1 年 Cookie
hs-membership-csrf HubSpot notwendig

このcookieは、HubSpotがログインプロセスの破損を防ぐために使用します。

セッション Cookie
hs_langswitcher_choice HubSpot notwendig

このcookieは、ユーザーが選択した言語を保存するためにHubSpotによって使用されます。

2 年 Cookie
__cfduid HubSpot notwendig

このcookieは、HubSpotがCDN / Cloudfareを介してデータを安全に転送するために使用されます。

セッション / 30 日 Cookie
__cfruid HubSpot notwendig

このcookieは、HubSpotがCDN / Cloudfareを介してデータを安全に転送するために使用されます。

セッション Cookie
gits_cookie_accepted_* digiwerk GmbH

cookieバナーの選択を保存します。

無期限 LocalStorage
fe_typo_user TYPO3

Wird vom CMS-System TYPO3 benötigt, um Benutzer am Frontend anmelden zu können.

1 Jahr Cookie
DataTables_* TYPO3

バックエンドにデータを表示するためのユーザー設定を保存します。

無期限 LocalStorage
t3-tabs-* TYPO3

バックエンドにデータを表示するためのユーザー設定を保存します。

無期限 LocalStorage
be_typo_user TYPO3

ユーザーがバックエンドにログオンできるようにするためにCMSシステムTYPO3で必要。

1 年 LocalStorage
PHPSESSID TYPO3

ユーザーがバックエンドにログオンできるようにするためにCMSシステムTYPO3で必要。

1 年 Cookie

マーケティング cookie は、ウェブサイトへの訪問者を認識するのに役立ちます。これにより、より正確な広告や検索結果を表示することができます。

名前 プロバイダ 目的 ずっと タイプ
__hstc HubSpot

このcookieは、HubSpotがユーザーの統計データに割り当てることができる固有のIDを登録するために使用されます。

13 ヶ月 Cookie
hubspotutk HubSpot

このcookieは、HubSpotがユーザーの統計データに割り当てることができる固有のIDを登録するために使用されます。

13 ヶ月 Cookie
__hssc HubSpot

このcookieは、HubSpotがユーザーのセッションを検出するために使用します。

30 分 Cookie
__hssrc HubSpot

このcookieは、HubSpotがユーザーのセッションを検出するために使用します。

セッション Cookie

統計 cookie は、匿名で情報を収集して報告することで、訪問者がどのようにサイトを利用しているかを理解するのに役立ちます。

名前 プロバイダ 目的 ずっと タイプ
_pk_id.*.* Matomo

このcookieは、Matomoによって使用され、固有の訪問者IDなど、ユーザーに関するいくつかの詳細を保存するために使用されます。

13 ヶ月 Cookie
_pk_ses.*.* Matomo

このcookieは、マトモが訪問時のデータを一時的に保存するために使用する短命のcookieです。

30 分 Cookie
_pk_testcookie..undefined Matomo

このcookieは、お客様のブラウザがcookieをサポートしているかどうかを確認するためにMatomoが使用します。

セッション Cookie

cookieは小さなテキストファイルで、ウェブサイトで使用され、ユーザー体験をより効率的にするために使用されます。当サイトの運営に絶対的に必要な場合、法律により、お客様のデバイスにcookieを保存することがあります。それ以外のすべてのcookieについては、お客様の許可が必要です。このサイトでは、さまざまな種類のcookieを使用しています。一部のcookieは、当社のページに表示される第三者によって配置されています。